Interfacing Android handset with microcontroller – Bluetooth

  • USB port
  • Bluetooth
  • Wi-Fi
  • GPRS

Here we will only discuss how to interface using a bluetooth connection. For this, you will need any simple microcontroller with UART interface and a Linvor Bluetooth module. The Linvor bluetooth module operates on 5V power supply and can be connected to the microcontroller using an UART interface.

MI Device control Application:

On the application side, I modified the Bluetooth chat application example from Android SDK. The application was developed for Gingerbread 2.3. Linvor bluetooth module works using the SPP protocol. The application takes care of initializing the handset’s bluetooth for SPP protocol and also provides options to search for bluetooth devices and sync with them. You can control 3 devices ON-OFF and fan speed from 0 to 99. I used a stepper motor to control the fans regulator/potentiometer and a ULN2803 to control the 3 relays for devices and a stepper motor.

  • Connect the VCC ->+5V,    GND->GND,    TXD->MCU RXD,    RXD-> MCU TXD
  • As soon as you power up the module, the red LED on the module starts blinking indicating that the module is ready for connection.
  • Next, search for bluetooth devices in range using the application.
  • The Linvor module will appear as linvor  in the found devices list.
  • Select and sync the handset with the linvor device.
  • Once the handset and the module are connected, the red LED on the module stops blinking and stays ON until the bluetooth connection is terminated. 

Download the Application..!!

Download the Android Application Source code..!!

Download the microcontroller code for PIC16F877A..!!

You can buy Linvor bluetooth module from NSK electronics @ Rs.1400 /- 

 

Also see :

 

Leave a Comment

Your email address will not be published. Required fields are marked *